My Cart

Close

Norton

Norton ADAEZ Door Operator Kit Push & Pull With Square Buttons 5845 X SQPB

$2,984.99 USD
5845 X SQPB

ADAEZ 5845 (PUSH AND PULL)

The 5800 Series Pro is an extreme duty, low energy operator designed for moderate to high traffic manual opening applications that occasionally requires powered operation. A regenerative drive system charges an onboard battery pack eliminating the need for electrical power.

The 80/25 guidelines should be applied when ordering this operator. It is recommended that the 5800 Series Pro be used on a door that gets approximately 80 manual cycles or more per day and is used 25% or less automatically.

When applied using the 80/25 guideline this operator will self generate all the power it needs to keep its field replaceable, onboard, battery pack charged for up to 12 years and in some cases longer.

A fully charged battery has the capability to open a door up to 2000 times in a row, generously allowing for periodic fluctuations from 80/25 guidelines with little impact on the product’s overall usability. Example: 30% automatic use for one day is not a problem, as long as that level of automatic use is not sustained.

The 5800 Series PRO can be used outside of the 80/25 parameters. Simply plug the unit into a common 110 VAC electrical outlet using our ADA1015P Hardwire Kit option. The Hardwire Kit is a low voltage plug in transformer and can be added to existing installed field units.

FEATURES

Regenerative drive or continuous duty operation

Non-handed

5° door opening

Push and pull side mounting

Push-and-Go (ADA1015P Kit must be connected)

Power Close (ADA1015P Kit must be connected)

Radio Frequency stainless steel push buttons

Integral RF receiver

Shock absorbing arm

693T (black) and 689 (aluminum) covers

24VDC input port » ADA1015P hardware kit

Built-in ON/OFF Switch

Auxiliary activation input port

Maximum door width - 48"

Maximum door weight - 250 lbs

Patented Auto-Tune feature ensures safety and compliance with A156.19 code

2 year limited warranty