Hikvision DS-K1T671TM-3XF Temperature Screening Terminal

Regular Price
Sale Price
Regular Price
Sold Out
Unit Price
translation missing: en.general.accessibility.unit_price_separator 
  • Access Control & Temperature Screening
  • Facial Recognition
  • M1 Card Reader
  • 2MP Dual-Lens Camera
  • 7" Touchscreen Display
  • 50,000 Face Recognition & Card Capacity
  • RS-485/RJ45/Wiegand/USB Interfaces
  • Lock/Door Contact/Exit Button Interfaces
  • 2 x Alarm Inputs & 1 x Alarm Output
  • Tamper Function
Implement access control and temperature screening with the DS-K1T671TM-3XF Temperature Screening Terminal from Hikvision. This device provides body temperature screening via a vanadium oxide uncooled sensor, along with access control via facial recognition and an M1 card reader. It features a temperature reading and facial recognition range of 1.6 to 5', along with 50,000 face, 50,000 card, and 100,000 event capacities. Additional features include a 7" touchscreen, a 2MP dual-lens camera with wide dynamic range, and voice prompts for abnormal temperature readouts and reminders.

Interfaces on this terminal include RS-485, 1000M Ethernet, Wiegand, 2 x USB, lock, door contact, exit button, tamper function, alarm output, and two alarm inputs.

Note! For accurate temperature reading, wait 90 minutes for the device to warm up after it is powered on.

  • Suitable for office buildings, transportation hubs, retail facilities, and education centers
  • Designed for an indoor and windless environment
  • Fast temperature detect mode without identity authentication
  • Authentication modes include card/temperature, face/temperature, card/face/temperature and more
  • Audio prompt for result authentication
  • Face mask detection
  • 2MP dual-lens camera
  • 7" touchscreen
  • M1 card reader
  • Configurable door status (open/close) when abnormal temperature is detected
  • Transmits online and offline temperature readout info to client software via TCP/IP communication
  • Saves data on client software
  • Imports and exports data from device from client software
  • NTP, manual time synchronization, and auto synchronization
  • Attendance status for checking in and out, breaks, and overtime
  • Connects to an external access controller or Wiegand card reader via Wiegand protocol
  • Connects to a secure door control unit via RS-485 protocol to avoid door opening if the terminal is destroyed
  • Watchdog design and tamper function