KanexPro UltraSlim 4K/30 HDMI over HDBaseT Receiver (130') EXT-HDBT70MRX

KanexPro EXT-HDBT70MRX Overview

Supporting HDMI signals over category cable, the KanexPro EXT-HDBT70MRX UltraSlim 4K/30 HDMI over HDBaseT Receiver enables extending transmission of HD signals up to 230', and 4K signals up to 131'. It is well suited for use in digital signage applications, as well as sending HDMI signals in healthcare AV facilities, control rooms, educational facilities, airports, and even in home theater installations. This receiver unit works with a transmitter (not included) and supports HD and UHD 4K signals. Following the HDBaseT protocol allows the receiver to support PoH (Power over HDBaseT), which allows you to power this receiver as well as an optional transmitter using only one power supply. Please note that the power supply is included with the transmitter, but not this receiver.The EXT-HDBT70MRX receiver is compliant with HDCP 2.2 and EDID, enabling support of HDMI content. The 10.2 Gbps bandwidth allows it to support signals up to UHD 4K 30Hz, at distances up to 131'. The receiver supports CEC (Consumer Electronics Control), bidirectional RS-232, and IR control. It is Dolby TrueHD and DTS Master Audio ready and supports LPCM Audio. It features LED indicator lights for power, signal (link), and HDCP. Included with the receiver are mounting ears and screws, an RS-232 cable, and an IR receiver.Used to extend transmission distances for HDMI signals up to 230' for HD and 131' for 4K signals over a single Cat 5e/6 cableIt supports control over RS-232 and IRThe receiver and optional transmitter as a pair include both an IR emitter and receiver. This allows you to control a device at the receiver end of the cable run from the transmitterReceiver can be powered directly by a power supply, or by PoH (Power over HDBaseT) from the transmitter (not included)HDCP 2.2 and EDID compliant