My Cart

Close

Rixson

RIXSON 27-105NHO LH LAP Floor Closer Heavy Duty Single Acting 105 Degree Swing

$709.99 USD
IF_E0C2D5FC

Rixson 27 LAP (Less All Parts) Left Hand Single-Acting 3/4" Offset Hung Floor Closer Body Only - Weight Up To 450 lbs.


Rixson 27 Floor closers shall be heavy-duty model 27 (offset). All Rixson 27 floor closers shall be handed. Choose appropriate functions and strengths to accommodate lead lining, extra high traffic, fire rating, independently hung or quick install models. These closers shall ave separate and independent checking valves, to control latch speed, closing speed and adjustable hydraulic backcheck. All single acting closers shall have a built in dead stop feature. All closers have one piece spindle assembly. Extra heavy-duty closers shall have minimum of two thrust bearings and one needle bearing. Rixson 27 Floor Closers shall not have compression spring.

Features Rixson 27 LAP , Floor Closers. Institutional Commercial Door Hardware

  • Built-in positive dead stop prevents door from swinging beyond the desired opening degree
  • Separate and independent valves for closing speed, latch speed and backcheck
  • Available non-hold open (N) or selective hold open (S) at same degree as dead stop
  • Delayed action option (Non-hold open closers only)
  • Models available to meet ICC/ANSI 117.1 low opening force requirements
  • Cold weather fluid available
  • Sealed closer option
  • Available with floor plate or thresholdinstallation
  • Available 1-1/2" offset, for doors with cladding or frames with applied molding, maximum door weight 250 lbs
  • Cycolac, rustproof cement case
  • Vertical door adjustment
  • Standard top pivot: #180 included
  • Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
  • For fire rated openings (up to 3 hour assemblies). This package will be supplied with a steel top pivot (F180) and a non-hold open closer
  • Fire rated closers cannot have PH option
  • For 20-minute labeled doors
  • Furnished with wood and machine screws
  • Extended spindles available in 1/2" increments up to 2" longer than standard